Error code lookup
KitchenAid Oven and Range Error Codes
What each code on your KitchenAid oven or range means, the one safe thing to check first, and when it’s time to call me. I checked every code here against KitchenAid’s own support pages and manuals.
4.6 from 39 Google reviews
24 codes
What your KitchenAid oven or range is telling you
Codes from KitchenAid’s online Product Help articles for freestanding and slide-in ranges. Wall ovens use some of the same codes with different meanings, so these entries apply to ranges only; KitchenAid commercial-style ranges have their own code pages and are not covered here.
That code isn’t on this list. It may be specific to your model, so call or text me at (480) 292-4746 with the code and model number.
F1
There may be a problem with the oven temperature sensor, the control or the associated wiring.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
Older ranges with single F-number codes.
F2
There may be a problem with the oven temperature sensor, the control or the associated wiring.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
Older ranges with single F-number codes.
F0 E0
The electronic oven control can’t identify what type of problem occurred; a part of the oven control system or its wiring may be at fault.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
F1 E0
There may be a problem with the oven control or its wiring.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
F1 E1
There may be a problem with the oven control or its wiring.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
F2 E1
There may be a problem with the user interface/keypad, the control or the associated wiring.
Try this first: Make sure the cooktop grates are installed properly and level (if one wobbles, try switching grates), then reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
The grate check applies to gas ranges with grates.
F3 E0
There may be a problem with the oven temperature sensor, the control or the associated wiring.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
F3 E1
There may be a problem with the oven temperature sensor, the control or the associated wiring.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
F5 E0
There may be a problem with the oven door latch assembly, the door switch or the associated wiring.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
F5 E1
There may be a problem with the main oven door latch assembly, the door switch or the associated wiring.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
F5 E2
There may be a problem with the main oven door latch assembly, the door switch or the associated wiring.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
F5 E5
The oven did not reach self-clean temperature within 30 minutes; there may be a problem with the door hinges or door gasket.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
F6 E1
There may be a problem with the appliance manager control or its wiring.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
F7 E5
There may be a problem with the cooling fan or its wiring.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
F8 E0
The cooling fan speed is too low; there may be an airflow restriction or a problem with the oven cooling fan or its wiring.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
FE E6
There may be a problem with the oven bake element or its wiring.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
FE E7
There may be a problem with the oven broil element or its wiring.
Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
C81
A surface cooking area overheated and the automatic shutoff turned it off.
Also shown as C82, C83
Try this first: Turn off the oven if it is on, wait 5 minutes for the cooktop to cool, then turn it back on.
Electric ranges.
H
Not a fault: a surface cooking area is still too hot to touch, even if it has been turned off.
Try this first: Let the cooktop cool. If H stays on or flashes after cooling, reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me.
Electric ranges.
Call Service
The control has detected a fault or error.
Also shown as Press Cancel to Reset
Try this first: Press Cancel. If call me still shows, reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power.
PUSH
Not a fault: an oven function was selected but Start was not pressed.
Also shown as PSH
Try this first: Press Start.
LOC
Not a fault: the control lock is on, so the pads won’t respond (and the oven door is locked).
Also shown as Lock, Locked
Try this first: With the oven and timer off, touch and hold Start/Enter for 5 seconds to unlock (see owner’s manual).
PrE
Not a fault: the oven is preheating or is still below 170°F.
Also shown as Lo, Pre
POWER LOSS
Power was first supplied or there was a power interruption.
Also shown as 12:00, Time
Try this first: Press Cancel to clear the display and set the time of day.
When to call me
If the safe check doesn’t clear the code, or the same code keeps coming back, the oven or range needs a real diagnosis. Error codes point to the system that failed, not always the exact part, so I test before I replace anything.
Never open panels, bypass a safety switch or work on gas or wiring yourself. Unplug the appliance or turn off its breaker if you smell burning or see water near electrical parts.
Upfront pricing
$65
Service call, waived when you approve the repair. You get an exact price before any work starts.
Stacked washer and dryer units have a $125 service call, also waived with the repair.
Where These Codes Come From
I checked every code on this page against KitchenAid’s own documentation on October 18, 2026, and left out any code I couldn’t confirm there. Meanings can differ between models and model years, so your owner’s manual or the tech sheet inside your oven or range has the final word for your exact model.
Manufacturer sources
- F1 – Error Code – Range (KitchenAid)
- F2 – Error Code – Range (KitchenAid)
- F0 E0 – Error Code – Range (KitchenAid)
- F1 E0 – Error Code – Range (KitchenAid)
- F1 E1 – Error Code – Range (KitchenAid)
- F2 E1 – Error Code – Range (KitchenAid)
- F3 E0 – Error Code – Range (KitchenAid)
- F3 E1 – Error Code – Range (KitchenAid)
- F5 E0 – Error Code – Range (KitchenAid)
- F5 E1 – Error Code – Range (KitchenAid)
- F5 E2 – Error Code – Range (KitchenAid)
- F5 E5 – Error Code – Range (KitchenAid)
- F6 E1 – Error Code – Range (KitchenAid)
- F7 E5 – Error Code – Range (KitchenAid)
- F8 E0 – Error Code – Range (KitchenAid)
- FEE6 – Error Code – Range (KitchenAid)
- FEE7 – Error Code – Range (KitchenAid)
- C81, C82 or C83 – Range (KitchenAid)
- Displaying an H – Range (KitchenAid)
- Call Service (KitchenAid)
- PUSH or PSH – Range (KitchenAid)
- Locked, Lock or Loc – Range (KitchenAid)
- Lo or Pre – Range (KitchenAid)
- Flashing Time, Clock, 12:00, Power Loss or Enter Time – Range (KitchenAid)
FAQ
KitchenAid oven or range code questions
What does error code F1 mean on a KitchenAid oven or range?
There may be a problem with the oven temperature sensor, the control or the associated wiring. Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me. If the code comes back, call or text me at (480) 292-4746.
What does error code F2 mean on a KitchenAid oven or range?
There may be a problem with the oven temperature sensor, the control or the associated wiring. Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me. If the code comes back, call or text me at (480) 292-4746.
What does error code F0 E0 mean on a KitchenAid oven or range?
The electronic oven control can’t identify what type of problem occurred; a part of the oven control system or its wiring may be at fault. Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me. If the code comes back, call or text me at (480) 292-4746.
What does error code F1 E0 mean on a KitchenAid oven or range?
There may be a problem with the oven control or its wiring. Try this first: Reset power by turning off the circuit breaker or unplugging the unit for one minute, then restoring power. If the code returns, call me. If the code comes back, call or text me at (480) 292-4746.
How much does it cost to have you diagnose a KitchenAid oven or range error code?
My service call is $65 ($125 for stacked washer and dryer units), and it’s waived when you approve the repair. I give you an exact price before any work starts.
More KitchenAid Error Codes
Other Oven and Range Brands
No Code on the Display?
Use my quick troubleshooter to match the symptom instead, or browse the full error code index
Ready when you are
Code still showing? Book your oven or range repair.
Call or text (480) 292-4746, Monday to Saturday, 9am to 6pm. Same-day and next-day appointments are often available.